From 25 to 5000 mm (steel long).
2 fixed values(3230m/s,5920m/s) and adjustable in the range 1000 to
9999m/s in steps of 1m/s.
0 to 365 µs
100dB, adjustable in steps of 0.1/2/6/12/20 dB
0.5-4 MHz narrow band, 5-15 MHz wide band
Pulse repetition frequency:
10-1000Hz, depending on the set calibration range and the probe
delay for adjustable
Pulse echo mode and Thru mode
Full wave, RF
Linear, 0 to 90% screen height adjustable in steps of 1%, status
indication on the display
Recording of up to 8 reference echoes, 40dB dynamic range, display of
the DAC curve
3 or 4 DAC curve can be setting
1000 A-scan Trace Data sets in the FLASH memory, with additional
alphanumeric identification and directory function.
|Units of measure:
mm or inch
Direct documentation: Hardcopy (contents of display), active measurement reading, test
report or thickness report, via the RS-232 interface to computer.
RS-232 C (bidirectional) or USB adaptor for PC computer.
Proportional voltage for amplitude and sound path of the echo in the
gate; TTL signal for gate alarm
Two LEMO 00 connectors
Removable 8800mAh/7.2V Li-ion Battery or mains supply via an
external mains power/charger unit JBD15-A2S
Up to 7.5 hours with Battery ( select LCD low bright )
Battery charge indication:
On the display
Permitted operating temperature:
-5o C TO +55o C
-40o C TO +75o C (without batteries)